HPE6-A45 Aos-switch Practice Questions

A network administrator needs to configure an AOS-Switch to classify traffic. Comparing QoS policy and global policy, what is one function that only a class-based QoS policy can fulfill?

• AA. Apply a DSCP to HTTP traffic from some sources but not other sources.
• BB. Apply a DSCP rather than an 802.1p value to classified traffic.
• CC. Override the incoming DSCP in the received traffic.
• DD. Override the DSCP or priority applied directly to an interface

What is a reason to implement port security on an AOS-Switch?

• AA. to simplify provisioning for devices such as IP phones or printers
• BB. to enhance the security of an 802.1X solution
• CC. to filter traffic at the edge, based on multiple criteria in the MAC header
• DD. to control management access to the switch CLI based on device, as well as user credentials

An AOS-Switch enforces 802.1X. It receives an Access-Accept with this HPE VSA from its Radius server: Attribute Name and ID = HPE-User-Role (25) Value = contractor The switch then rejects the client. What is one requirement for the switch to accept the message and authorize the client?

• AA. The initial user role must be set to the factory default permit any role.
• BB. User role authorization must be enabled globally on the switch.
• CC. An aaa authentication local user group must have the contractor name.
• DD. The RADIUS server settings must permit dynamic authorizatio