HPE0-S56 Switch Practice Questions

You are installing a data center switch. Which methods are recommended to configure the switch? (Choose two.)

Select 2 answers.

• AA. Use out-of-band management with a dedicated management connection
• BB. Use in-band management with an IP address and subnet mask that is reachable on the management network
• CC. Use out-of-band management and keep the default settings
• DD. Use in-band management and configure the AUX0 interface for scheme authentication

You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade to be activated on the first switch before beginning to install the firmware on the second switch. What must you do to install the firmware on the second switch?

• AA. Perform a hot reset on the first switch to initiate the installation on the second switch
• BB. Reactivate the upgrade on the first switch before attempting to update the firmware on the second switch
• CC. Reinitialize the devices attached to the first switch before installing the firmware on the second switch
• DD. Perform a hot reset on the second switch after the first switch is activated

A customer is planning an upgrade to their network infrastructure. They want to move to an open networking solution, and they want to install a network switch that supports their choice of network operating system. Which HPE product family will meet the customer’s needs?

• AA. Altoline
• BB. FlexFabric
• CC. Arista
• DD. Aruba